- No products in the cart.
20/12 Series 1150-1350/500 Drill Compressor
20/12 Series 1150-1350/500 Drill Compressor
Sullair 500psi Air End
The Sullair high pressure two stage rotary screw drill compressor delivers capacities and pressures from a range of 1150 cfm at 500 psig or 32.6 m3/min at 35 bar to 1350 cfm at 500 psig or 38.2 m3/min at 35 bar. The Drill air-end is designed with a inlet control system and drive adapter to match up with drive choices. Multiple gear ratio’s with matched internal volume ratio’s dials in specific capacities and pressure for optimum performance.
20/12 Series 1150-1350/500 Features
- Bare shafted drill airend
- 2-Year warranty
Rotors
Precision ground asymmetric profile delivers an optimal combination of capacity and power. Rotor speed range: 15 m/s to 50 m/s on male rotor tip.
Discharge
Several built-in volume ratios offer a range of pressure ratios meeting specific application requirements.
Gears
AGMA Class 11 Gears allow for a variety of internal gear ratios contributing to design optimization and operation economy.
Casing
Heavy duty double-wall cast iron casing provide for structural rigidity, pressure integrity and low noise.
Drive Adaptor
Available drive adaptors (flywheel adaptors or base mounted) offer a convenient means to match up the air end with the drive unit.
Shaft
The steel input shaft can be easily adapted/coupled to the driver with a variety of methods: keyed fit, mechanical locking or shrink- t coupling hub. Drivers used include natural gas and diesel engines; 1800 rpm, 2100 rpm motors; and variable speed drives.
Bearings
The anti-friction bearings are manufactured from all-steel (no plastic or “yellow metal” cages) construction for superior durability. Tapered roller bearings absorb thrust and radial loads; while straight roller bearings handle opposite end radial loads both contributing to the optimal performance of the rotors, even in the harshest of conditions.
Capacity Controls Options
Capacity controls are an option offered on several models. These controls allow gases that have been only slightly compressed to bypass back into the suction head. Capacity can be manually adjusted or automatically controlled based on pressure signal.
Warranty
Sullair Drill Compressor air ends are warranted for two years against defects in materials and workmanship.
20/12 Series Drill Compressor Kit- Optional
- Inlet control valve (Poppet or Butterfly valve assembly)
- Fluid filter
- Oil stop valve
- Housing drive adapter SAE FLYWHEEL ADAPTER OR NO
ADAPTER. - Coupling assembly
- High temperature shut down switch
- Discharge check valve if required
- Inlet filter ( fillter only shipped loose )
- Separator element
- Separator fluid return line w/sight glass
- Minimum pressure check valve
- Fluid thermal valve
- Pressure relief valve
- Running blowdown valve & shut down blowdown valve
- Coalescing control line filter
- Regulator panel assembly (350 & 500 PSI)
- Loose regulator (low pressure)
Sullair 500psi Air End
Sullair is a leader in supplying compressed air solutions to the major global OEM market place. Sullair drill products are used around the world in such applications as Oil and Gas Exploration, Water Wells, Geothermal Energy Access, Monitoring/Environmental Drilling, Rock Drilling for Blasting. Sullair’s wide range of Drill compressor products supports the drilling market with proven reliable compressed air solutions.
Technical Specifications
| Model | 20/12 Series 1150-1350 |
| Capacity (cfm) | 1150 to 1350 |
| RPM | 1800/2100 |
| Rated Pressure (psig) | 500 |
| Approx Weight (kg) | 1066 |
| L x W x H | 47" x 34.8" x 42" |
Sir we want pressure relief valve for sullair air compressor model-20/12, 500-1350CFM.Can you please provide the part number with rate.