Unit Series 20XL Drill Compressor
Drill Air End Compressor
The Sullair low pressure single stage rotary screw drill compressor delivers capacities and pressures from a range of 900 cfm at 100 psig (25.5 m3/min at 7 bar) to 1050 cfm at 200 psig (29.7 m3/min at 14 bar). The drill air end is designed with an inlet control system and drive adapter to match up with drive choices. Multiple gear ratios with matched internal volume ratios dial in specific capacities and pressure for optimum performance.
Series 20XL Features
- Bare shafted drill airend
- 2-Year warranty
Precision ground asymmetric profile delivers an optimal combination of capacity and power. Rotor speed range: 15 m/s to 50 m/s on male rotor tip.
Several built-in volume ratios offer a range of pressure ratios meeting specific application requirements.
AGMA Class 11 Gears allow for a variety of internal gear ratios contributing to design optimization and operation economy.
Heavy duty double-wall cast iron casing provide for structural rigidity, pressure integrity and low noise.
Available drive adaptors (flywheel adaptors or base mounted) offer a convenient means to match up the air end with the drive unit.
The steel input shaft can be easily adapted/coupled to the driver with a variety of methods: keyed fit, mechanical locking or shrink- t coupling hub. Drivers used include natural gas and diesel engines; 1800 rpm, 2100 rpm motors; and variable speed drives.
The anti-friction bearings are manufactured from all-steel (no plastic or “yellow metal” cages) construction for superior durability. Tapered roller bearings absorb thrust and radial loads; while straight roller bearings handle opposite end radial loads both contributing to the optimal performance of the rotors, even in the harshest of conditions.
Capacity Controls Options
Capacity controls are an option offered on several models. These controls allow gases that have been only slightly compressed to bypass back into the suction head. Capacity can be manually adjusted or automatically controlled based on pressure signal.
Sullair Drill Compressor air ends are warranted for two years against defects in materials and workmanship.
Series 20XL Drill Compressor Kit- Optional
- Inlet control valve (Poppet valve assembly)
- Fluid filter
- Oil stop valve if required
- Housing drive adapter SAE flywheel adapter
- Coupling assembly
- Inlet filter (Filter only shipped loose)
- High Temperature shut down switch
- Discharge check valve if required
- Receiver Tank
- Separator element
- Separator fluid return line w/sight glass
- Minimum pressure check valve
- Fluid thermal valve
- Pressure relief valve
- Running blowdown valve & shut down blowdown valve
- Coalescing control line filter
- Regulator panel assembly (350 & 500 PSI)
- Loose regulators (low pressure)
Drill Air End Compressor
Sullair is a leader in supplying compressed air solutions to the major global OEM market place. Sullair drill products are used around the world in such applications as Oil and Gas Exploration, Water Wells, Geothermal Energy Access, Monitoring/Environmental Drilling, Rock Drilling for Blasting. Sullair’s wide range of Drill compressor products supports the drilling market with proven reliable compressed air solutions.
|Model||Unit Series 20XL|
|Capacity (cfm)||900 to 1050|
|RPM||1800 / 2100|
|Rated Pressure (psig)||100 to 200|
|Approx Weight (kg)||627|
|L x W x H||40.32" x 23.88" x 18"|