The 1310 Booster uses 4 Cylinders drive and 4 boosting. With inlet pressures at 350 psi and outlet pressures up to 1200psi this booster is perfect for exploration drillers using one compressor, looking for greater depth performance, better penetration, dryer samples, and longer bit life. A great all rounder and essential auxiliary equipment!
Standard features
- Open frame configuration
- On board fuel tank
- Booster bypass manifold (Single Stage)
- Two-way concentric valves
- Automatic scrubber tank drain valve
- Overspeed shutdown valve
- Inlet particle filter
- Water cooled booster block
- Pre-cooler bypass system
- Inlet suction manifold
- Discharge temperature sensor
- Pre-cooler (40°C) & suction scrubber tank
- Aftercooler (100°C) max operating temperature
- Low pressure switch at booster inlet
- 24 volt DC starting and operating system
- Suction and discharge safety relief valves
- Full function instrument panel monitoring all pressures, temperatures and controls with full protection shutdown and fault indicators.
Optional features
- Canopy / cladding
- Digital control panel (Booster)
- Top Lift feature
- Extreme cold weather start kit
- Achievement of exit temperature bogies
- Spark arrestor
- Trailer mounted unit
- Lights for night operation
- Engine speed adjustment
- Insulation package to canopy
- Service packs 250/500/1000/2000 hours
- Valve and piston kits
- Other options, pressures, capacities:
available on request - Container and rig safe models as well as other options, capacities and pressures available – consult factory.
Technical Specifications
Booster type | 4 cylinders, reciprocating |
Configuration | INTEGRAL |
Model | ARC 1310 8V92T |
Drive engine | Detroit Diesel - 8V92T |
Power | 210 bhp @ 1800 rpm |
Booster stages | 1 |
Max suction pressure (psi / bar) | 350 / 24 |
Max discharge pressure (psi / bar) | 1000 / 69 |
Capacity at maximum suction pressure (cfm / m3/min / I/sec) | 1300 / 37 / 614 |
Booster oil capacity (gal / I) | See engine |
Engine oil capacity (gal / I) | 6.6 / 25 |
Fuel tank capacity (gal / I) | 105.7 / 400 |
Max operating ambient temp. (°F / °C) | 125 / 52 |
Wet weight (lb / kg) - (approximate) | 6173 / 2800 |
Overall dimensions, L x W x H (in / mm) | 6'3" x 4'11" x 6'9" / 1900 x 1500 x 2050 |
Suction connection | 50mm ( 2”) BSP |
Discharge connection | 40mm (1 1/2”) BSP |