CLS Signature Series Elite Booster

CLS Signature Series Elite Booster

CLS Signature Series Elite Booster- CLS-manufacturers/ builds/assembles the entire unit, DNV skid, vessels and packages everything in house. No third party manufacturers are used to assemble this booster compressor. This process ensures quality control throughout the entire package.

Standard features

  • Engine: Cummins QSX-15 600hp inline 6-cylinder, turbo charged, tier 3 flex diesel (rig safe air inlet/over speed shutdown).
  • Exhaust muffler: Critical grade spark arresting, safety insulated turbo, manifold, pipe and muffler.
  • Control panel: Offshore sealed/316 stainless steel by CLS, with throttle control, and complete engine and compressor systems pressure and diagnostic monitoring, with protective safety shutdowns.
  • Starter: Air and electric as standard.
  • Fuel Tank: 30 Gallon ASME Code fuel cell designed to be quick coupled to large fuel tank or rig tank fuel storage.
  • Coupling: Direct drive without clutch.
  • Compressor: Gardner-Denver JY500/WB-12.
  • 1st stage compressor cylinder: Gardner-Denver 6” bore 1700 psi MAWP 7” stroke (cylinder hydro tested to 2550 psi).
  • 2nd stage compressor cylinder: CLS 3.75” bore 3200 psi MAWP 7” stroke (cylinder hydro-tested to 4800 psi).
  • Vessels: All asme code certified by CLS one for each stage of compression.
  • Cooler: Fin-x asme code certified intercooler and aftercooler with stainless-steel tubes and antistatic fan and belts and manual louvers for temperature control.
  • Skid: CLS certified and tested skid with lifting frame. Includes galvanised roof grating, skid has tail rolls on both ends and 4- point lift lugs with seal welding for full oil/spill containment with corner drains.
  • Piping: Made by certified welders to B31.3 specifications and 100% hydro-tested and x-ray on all piping welds.
  • Relief Valves: Certified and tagged with certification papers for proper pressure for each stage.
  • Valves: Heavy duty full port ball valves with complete bypass unit without removal of discharge hoses/ piping.
  • Paint: CLS- Diamond vogel offshore zinc coating 3- part system.
  • Battery Box: Integrated into skid with two 8-D maintenance free batteries with battery shutoff switch.

Use Applications

  • Pipeline pressure testing with air/nitrogen/natural gas
  • Pipeline dewatering
  • Pipeline commissioning
  • Pigging and cleaning
  • Pipeline gas transfer/evacuation
  • Air drilling
  • Underbalanced/controlled pressure drilling
  • Nitrogen boosting
  • Aerated mud/foam/ and mist drilling
  • On and Offshore and deepwater and down hole construction and testing
  • Pipe pressure testing
  • Anywhere where air/nitrogen/gas pressure needs to be boosted from primary compressors or pressurized sources

CLS Signature Series Elite Booster

Technical Specifications

Compressor TypePiston
Drive EngineCummins QSX-15
Power600 hp @ 1800 rpm
Max suction pressure (psi / bar)350 / 24
Max working discharge pressure (psi / bar)2500 / 173
Engine oil capacity (gal / I)12 / 45
Max operating ambient temp. (°F / °C)125 / 52
Weight (lb / kg)36,900 / 16,738
Overall dimensions, L x W x H (in / mm)23'9.5" x 8'6" x 8'6" / 7252 x 2591 x 2591

Leave a Reply

Your email address will not be published. Required fields are marked *